There is no denying that the consumption of a lot of goods and services depends upon the smooth functioning of the commercial vehicles carrying them. Be it the refrigerated trucks, or the vegetable carrying lorries, all of these vehicles need some form of upkeep and maintenance, to ensure that the cargo is delivered securely and in good condition at its intended destination. Of course, maintenance is also imperative to avoid unforeseen incidents and accidents while driving. Here are some quick and easy ways to keep a commercial fleet in proper shape:
Knowing the Engine
The engine is the heart of the vehicle; so, when it comes to its maintenance, compromises are not acceptable.
• Checking the level of engine oil is a must. Good engine oil aids in keeping the engine lubricated and helps it to run for long hours. It is easy to check if a vehicle has the optimum amount of engine oil. When the engine is cool enough, one needs to pull out the dipstick, clean it with a piece of cloth, and dip it all the way in again, to check if it contains the desirable oil levels. One should also take care not to mix two different varieties of engine oils.
• The coolant can also be checked in a similar fashion as above. By going through the handbook provided, one can find the location of the cooling reservoir.
• The belts that run around the pulley systems in the engine bay are made up of rubber. It is advisable to check the rubber belts once every 25000 miles and change them after every 50000 miles.
Tires and the Wheel
• Checking the pressure of the tires is a prime necessity, since it directly impacts the fuel economy of the vehicle. https://autof.vn/xe-dau-keo-khac
• Dirt and grime often form a moisture laden cake on the tires. A sponge along with some warm water is a neat and easy trick to wipe it all off.
• A minimum 3mm of tread is necessary for a four-wheeler to function properly during the colder months. One should always keep a tab on the wear and tear of the tires, and replace them, whenever required.
• One should also make sure that the tires are properly inflated. While over-inflation may bring about tire blowouts, under-inflation may trigger weakening of side walls or even tread separations.